底座,毛巾桿衣架桿管頭固定座Pole Socket Sets-2940016CP

Pole Socket Sets 中英文介紹與安裝使用教學

📌 產品介紹 Product Description

中文：
Pole Socket Set（桿座組）是安裝衣櫃桿、窗簾桿、吊桿等橫桿的專用配件，通常包含兩個對稱的圓形或U型托座，用來固定在牆面或櫃體側板上。部分設計中，還會包含螺絲、膨脹管、中央加固螺栓等配件，提供牢固穩定的支撐。

英文：
Pole Socket Sets are essential hardware accessories used to support horizontal rods, such as wardrobe rods, curtain rods, or hanging bars. The set typically includes a pair of symmetrical round or U-shaped sockets designed for wall or cabinet installation. Some sets also include screws, wall plugs, and center stabilizing bolts for enhanced stability and support.

🛠 安裝教學 Installation Guide

中文教學：

1. 測量位置：用捲尺量出兩側牆面或櫃體內部的高度與寬度，確保桿子水平安裝。

2. 標記孔位：將桿座對齊預定位置，用鉛筆在牆面或板面上標出螺絲孔位。

3. 鑽孔（牆面用）：如安裝於水泥牆或磚牆，請用電鑽打孔，並放入塑膠膨脹管。

4. 安裝桿座：用螺絲將兩個桿座固定在預設位置。確認方向一致（若一邊有開孔為可拆型，應朝上或外側）。

5. 裝入橫桿：將橫桿從一側插入，或放入兩側托座內，若有鎖緊設計，請旋緊螺帽或固定扣。

英文 Guide：

1. Measure the Area: Use a tape measure to determine the correct height and width between the two sides of the cabinet or wall. Ensure the rod will be level.

2. Mark Drill Points: Align the sockets to the chosen position and mark screw holes with a pencil.

3. Drill Holes (for walls): If installing on concrete or brick walls, use a power drill to make holes and insert plastic wall plugs.

4. Attach the Sockets: Screw both sockets firmly into place. Make sure they are aligned and facing the correct direction (some may have an open end for easy rod insertion).

5. Insert the Rod: Slide the rod into place through one socket or place it directly into both sockets. If the sockets have a locking mechanism, tighten the screw or lock to secure.