L Screw有肩折釘 7234047

L Hook Anchor 產品介紹 / Product Description

中文描述：
L型掛勾錨栓（L Hook Anchor） 是結合了「L型金屬掛勾」與「膨脹錨栓」的固定件，專為吊掛中至重型物件於混凝土、磚牆、水泥天花板等實心基材上設計。L型設計可提供穩定的受力方向，適合用於管路支撐、電纜固定、裝飾物、吊扇、照明設備等懸吊應用。

產品特點：

• L型結構：受力方向清晰、承載穩定

• 一體成型或螺紋連接型，可選擇膨脹螺絲、化學錨栓等固定方式

• 適用基材：混凝土、磚牆、水泥板、石材等

• 材質：鍍鋅碳鋼、不鏽鋼304 / 316

• 表面處理：電鍍鋅、防鏽塗層、不鏽鋼拋光

• 常見尺寸：M6、M8、M10、M12，長度可依需求客製

• 適用場景：室內外裝修、倉儲吊架、工地施工、吊掛燈具、線槽固定、天花板懸吊系統等

English Description:
The L Hook Anchor is a heavy-duty anchor system combining an L-shaped hook and an expansion anchor or chemical bolt. It is designed to support vertical and angled loads in solid surfaces such as concrete, masonry, or cement ceilings. The L shape offers secure and directional support, making it ideal for suspending cables, lighting fixtures, pipes, or decorations.

Product Features:

• L-shaped design for directional and stable load distribution

• Available in integrated or threaded models with expansion or chemical anchors

• Suitable for concrete, brick, stone, and other solid substrates

• Materials: Galvanized carbon steel, stainless steel 304 / 316

• Finishes: Zinc-plated, anti-corrosion coating, polished stainless

• Common sizes: M6, M8, M10, M12, with custom lengths available

• Applications: Ceiling mounting, lighting suspension, pipe support, cable tray installation, warehouse hanging systems

🔧 使用教學 / Installation Instructions

中文使用說明：

1. 確認安裝表面與荷重需求
   根據牆體材質與預期荷重，選擇適當的L型掛勾錨栓型號與尺寸。

2. 標記安裝位置
   在牆面或天花板上使用水平儀與筆標出準確安裝點。

3. 鑽孔
   使用電鑽搭配對應規格鑽頭打孔，孔深應略大於錨栓長度。

4. 插入錨栓
   將錨栓部分插入孔中（若為化學錨栓需先注膠），確保完全插入。

5. 旋入或擰緊L型掛勾
   若為螺紋式，將L勾旋入已安裝之錨栓；若為一體式，使用扳手擰緊固定。

6. 測試牢固度後懸掛物件
   完成後拉扯測試牢固度，再懸掛燈具、工具或管件。

English Instructions:

1. Verify Surface and Load Requirements
   Choose the appropriate anchor type and size based on the substrate and the expected load.

2. Mark Installation Location
   Use a level and pencil to mark the exact spot on the wall or ceiling.

3. Drill a Hole
   Drill a hole using a masonry bit of the appropriate diameter and depth (slightly deeper than the anchor).

4. Insert the Anchor
   Insert the expansion or chemical anchor into the hole. If chemical, inject adhesive before insertion.

5. Install the L Hook
   Thread or tighten the L hook into the anchor using a wrench.

6. Test and Use
   Test the hook with moderate force. If secure, hang your intended item.